Google+

Handmade Custom Copper Pendant Lighting

Using copper in interior design allows you to achieve a distinctive look that is warm and inviting. Like the handmade custom copper pendant lighting below, copper can come in many different style choices and finishes.

custom copper pendant bottom

custom copper pendant top

custom copper pendant full length

custom copper pendant shaft

When you’re planning for your next interior design project, don’t forget about copper.  Unlike other design and color trends, copper never goes out of style.  Contact our lighting design professionals today to get started.

Giveaway: American Made Handcrafted Lighting

Our sister company, Lanternland, is offering an American made handcrafted lighting fixture as a prize in this week’s giveaway!

Lanternland-American-made-lighting-558x390

AMERICAN MADE HANDCRAFTED LIGHTING BY LANTERNLAND

Lanternland has been manufacturing artisan copper lanterns and brass indoor & outdoor lights in the Phoenix, AZ area since 1978.  Each Lanternland light fixture is 100% handcrafted in the USA and made to order by skilled craftsmen. Each light fixture is created to fit a customer’s specific choice of finish and glass type. Lanternland even offers custom lighting design.  The high quality, solid brass and copper construction of every light will never rust or corrode and is guaranteed for life.  

If you are looking for a ceiling light,  hanging lantern, wall sconce, wall light, post lantern, and now table lamps for your Colonial, Traditional American, Cape Cod, waterfront, or cabin style home, Lanternland is the place to check out first!

THE GIVEAWAY

ENTER NOW to win an American made, handcrafted Lanternland light fixture.  Winner may choose ONE of the following items in their choice of finish and glass.

ADAMS COLONIAL PENDANT 

As shown below: Small size, Antique Brass finish, Water glass
Choose from Small, Medium, or Large size.
Retail value: $330

ADAMS COLONIAL PENDANT

AMERICANA STAR COLONIAL WALL SCONCE

As shown below: Verdi Green finish with star in Antique Bronze, Seeded glass
Available in one size only.
Retail value: $330

Americana Star Colonial Wall Mount Lantern

BACK BAY NAUTICAL TABLE LAMP

As shown below: Antique Copper finish, Seeded glass
Available in one size only.
Retail value: $310

BACK BAY NAUTICAL TABLE LAMP

GATSBY WALL BARN LIGHT

As shown below: Dark Copper finish
Small only
Retail value: $290

GATSBY WALL BARN LIGHT

There are a variety of ways to enter this giveaway including opportunities for multiple daily entries. Good luck!

Click on Enter to Win on the image below.  This giveaway will close at midnight on July 21, 2016. The winner will be randomly selected, verified for correct entry participation, and notified by email.

American-made-handcrafted-lighting-by-Lanternland-Made-in-USA-indoor-and-outdoor-lighting

Handmade Chandeliers and Pendants Up To 75% Off

From June 27 through July 1, celebrate Independents Week 2016 and Local Businesses by using this Golden Coupon at Pentimento Lighting & Furnishings for an additional 20% off your purchase of handmade chandeliers and pendants.  Our beautiful one-of-a-kind lighting is already discounted up to 75% so we can make room for new light fixtures.

PRINT OUT the coupon below or show us on your mobile device and go to our factory showroom:

737 W. 2nd Avenue, Mesa, AZ 85210
Mon – Fri: 10:00am – 4:00pm

(480) 962-1918

Browse through our SALE ITEMS page to see some of the many beautiful indoor light fixtures available.  We have much more on display in our showroom.

Golden Coupon

Houzz Spotlight: Choosing The Right Outdoor Lighting Fixtures

“No matter how beautiful the design, if the size is wrong, the lantern will not look good.”

For Andrew Medway, choosing the right outdoor lighting fixtures is essential. It’s also something that he frequently finds is done wrong, and usually the culprit is the size of the light fixture. “It’s critical not only to match the style but also the scale of the project. Large homes require large lighting fixtures,” he says.

Medway co-owns Lanternland in Mesa, AZ which produces handmade copper and brass light fixtures and provides custom lighting, primarily for outdoor spaces. The first step of designing a lighting plan, according to Medway and his colleague Jenifer Tague, is to think about the project as a whole and consider both space and proportions.

Outddoor Living Patio: Michelets Residence

Go big. When it comes to outdoor lighting, most people choose fixtures that are too small, Medway says. “Remember that people will be seeing the light fixtures from a distance, such as a street that may be 50 feet away,” he says. For a good perspective on how big a light should be, Medway recommends making a mock-up that’s the size of the fixture to use as a placeholder, then stepping away and seeing how it looks in the space.

Entry: Michelets Residence

Design with needs in mind. “Many homeowners have design challenges that can’t be met by off-the-shelf lighting,” Medway says. These include space limitations for mounting brackets, existing siding, a need to modify the electrical box or local regulations that rule out most off-the-shelf fixtures. This is when custom lighting is the best option. “All of our lanterns are handmade to order for each client,” he says.

Whether you’re looking for standard light fixtures or going with a custom design, Medway offers advice for choosing the right lighting for your home.

Landon Sr. Wall Light with Bracket - Paradise Valley, AZ - Garage

1. Find the Right Size

One size does not fit all, especially in larger spaces. This homeowner in Paradise Valley was unable to find outdoor lanterns that were large enough to provide both curb appeal and adequate lighting, Medway says. Customizing an existing design proved to be the optimal solution.

“We were able to create an oversized version of one of our standard lanterns that was in proportion with her home and gave it the wow factor she desired,” he says. Medway also recommends looking at surrounding areas at the same time to coordinate the lighting throughout your outdoor space. For this home, Lanternland created a matching two-tiered pendant for the entry as well.

See more of this project

Custom Pendant Lantern for Outdoor Living Space - Installation #4

2. Match Lighting to Your Style

Finding a style you love is also essential, Medway says. “No matter if the client starts with a vague idea, a sketch on a napkin, a picture torn from a magazine or a finished architectural drawing, we work with them to get the look that is just right for their home,” he says. For one homeowner in Moraga, California, this meant fabricating a custom pendant lantern based on a photo she had found online.

“She was building a pergola for her outdoor living space and had her heart set on getting the look she had seen on Houzz,” Medway says. When she wasn’t able to find the pendant, or any information about it, she turned to Lanternland. “We modified the original concept slightly and went with an open bottom to allow easy access to the bulb,” he says.

See more of this project

Coronado Mission Wall Light Copper Lantern Installation - Coronado Beach, CA

3. Check Your Local Regulations

Many areas have ordinances that limit the amount of light that can be used outdoors at night. “This homeowner in Coronado, California, had a design she liked but could not find what she wanted in a lantern that met the dark-sky outdoor lighting regulations,” Medway says. “We were able to guide her to a lantern style that matched her home and could be modified to meet the requirement.”

See more of this project

More: For more information on Andrew Medway and Jenifer Tague and examples of their work, visit Lanternland’s Houzz profile.

This story was written by the Houzz Sponsored Content team.

We Have a Winner PLUS Get a 15% Off Coupon

Giveway Winner

cape cod onion lantern

Congratulations to our copper lantern lighting giveaway contest winner Brenda H. of Oregon!  Brenda chose the Cape Cod Onion Pendant Lantern in Dark Copper with Seeded Glass for her home.

thank you

We will be doing another giveaway later this year.
Stay tuned for details!!
 
A big ‘Thank You’  from Lanternland to everyone who entered and to USA Love List for making our giveaway contest a huge success. We truly appreciate the time and effort you put into spreading the word about Lanternland and the importance of buying American made products.As our way of saying thanks we will be offering 15% off all four lighting fixtures featured in the contest until April 30th, 2016. Save now on the New Haven Wall Sconce, the Cape Cod Pendant, the Portland Pendant and the Back Bay Post Light. Enter coupon code USALL04-15 at checkout to save.

shop lanternland to save

Custom Made Crystal Chandelier

We custom finish each chandelier to the clients specifications.  Your custom made crystal chandelier can complement any aesthetic.

Custom Crystal Chandelier

Custom Crystal Pendant

Custom Pendant Light

Custom Wall Sconce

All Pentimento light fixtures are manufactured and created in our very own factory in Mesa, AZ.  We’re only a few short minutes away from Phoenix and Scottsdale.  Our team of lighting designers and artisans ensure every light fixture meets every client specification.

Have a question about how we can help you?  Call us at (480) 962-1918 or (855) 223-5500 or use our contact form.

Win a Handmade Copper Lantern!

Win a handmade copper lantern valued up to $400!

back bay post mount copper lantern

Pentimento Lighting and Lanternland are teaming up again with USA Love List to give away one of our most popular lighting fixtures. The winner will choose from one of four popular styles in a variety of size, finish and glass options to create a handmade copper and brass lighting fixture that is as distinctive as their home.

From Friday, March 4th thru Thursday, March 17th 2016, go to http://bit.ly/1Qw66mN and enter for your chance to win.

Win a Handmade Copper LanternEnter Now To Win!

Industrial Vintage Lighting Design in Tucson

We’re excited about tonight’s event at Interiors In Design in Tucson, AZ to kick-off Desert Dwelling Design Week 2016. This event is sponsored by the Arizona South Chapter of the American Society of Interior Design (ASID).  This three-day design event is open to the public and is being held March 4 – March 6, 2016 to increase public awareness of local ASID designers, their design resources and the value of interior design in desert living, both indoors and outdoors.

Eva Muzraite and Brandy Holden of Interiors In Design collaborated with Pentimento Lighting to create innovative lighting designs for their new studio.  The industrial copper wall sconce was created by Pentimento from a conceptual rendering submitted to them by the designers. See below for construction and completed photos  These wall sconces made of raw copper tubing and raw steel are in the Powder Room at the studio. Be sure to take a peek.

The custom chandelier is 5′ feet in diameter to complement the large space and high ceilings. The assortment of vintage light bulbs in the antique bronze light sockets are  staggered from J chords. See photos below. You will see this industrial vintage design as soon as you walk into the showroom.
Enjoy the event this evening. Jenifer Tague from Pentimento Lighting will be there to answer any questions regarding these designs as well as what lighting Pentimento can create for your projects.  Stay tuned for photos from the event.

As Seen In Phoenix Home & Garden Design Guide

Phoenix Home and Garden Design Guide

We’re excited to let you know that we are part of the 2016 Phoenix Home & Garden Top Design Guide. Both Pentimento Lighting and Lanternland have been manufacturing custom and handmade lighting in the Valley for over 30 years.

It’s worth the drive to our factory and showroom located a few short miles off the 101 freeway in Mesa.  You will find beautiful custom chandeliers, handcrafted copper and brass lanterns, made to endure a lifetime.  Custom sizes and designs are available upon request.

Fabulous prices on high end lighting products.  Our factory showroom always has amazing bargains on close-out pendants, chandeliers, wall sconces, foyer and kitchen lighting.

Stop by or call (480) 964-3258 today to speak with our Lighting Design Consultants.

PH&G Design App Footer

Your mobile guide to our lighting design experts!

1. Easy to use and on the go!
2. Real time company info and images.
3. Active links to our website.

…and much more!

app store

Hand Blown Glass Pendant Lights

Hand Blown Glass Pendant Lights

If you’re considering remodeling the exterior of your home and ready to try something completely new and different, using hand blown glass pendant lights will transform your home’s curb appeal into extraordinary and unique.

Hand blown glass pendant lights are one of a kind, and you can customize them in many colors, shapes, and sizes.  For instance, one of our customers provided us with an image of a glass pendant light they wanted us to manufacture.  What you see above is a beautiful, handcrafted pendant light we brought to life from a simple picture.  This particular pendant is being installed for outdoor lighting, but this design can also be used for indoor lighting.

New lighting designs like this are always welcome at Pentimento Lighting.  Every light fixture is handcrafted and creating a custom design is always an option in our process.